Reolink POE NVR Power Adaptor Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount the power brick for Reolink POE NVRs. No supports needed.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 435
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom wall mount for the power brick that was shipped with a Reolink RLN16-410 in May 2025, in the US.
Dimensions of the power brick are 7 ½" x 3 3/8" x 1". It is not Reolink branded, so a decent chance they source different ones. Check your size.
There is a slot for the power cord so no need to disconnect it, three recessed + countersunk holes for screws, and a press-in grip to secure the power cord. Included STEP and Fusion 360 files so you can modify.
Print standing up (like in the 2nd picture) with the base where the power cord comes out on the bed. No supports are needed. I printed with 3 wall loops.