Liczymy pasujące modele…
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.
Brackets to mount NVR under desk. I added pocket cutouts to allow TPU pads to prevent vibration being transferred to the desk.
Please be aware that here are mulitple variants of the board with slightly different layout of ports. You might need to adjust included OpenSCAD file to match your hardware and regenerate STL files from it.
I wanted to rack mount my reolink RLN8-410 NVR and found the original model lacking in some areas and the dimensions were off from my exact unit (Purchased Nov. 2024). So I recreated the original footprint, resized and made it a single…
I needed to wall mount a Reolink RLN36 NVR and JH3D's solution was perfect with the only exception being it was hard to screw in as there was no easy access for my cordless drill for the bottom screw hole.
Modified bracket - added USB extension slot. Useful for USB flash firmware updates, mouse etc.
Remixed the original excellent design for the board I just received There were 3 changes to accommodate the newer style NVR board: 1. Moved the 3.5mm jack and RJ45 down further 2. Made the case wider so the RJ45 wouldn't run into the…
This is an enclosure I designed for housing an Ingenic "15$ NVR board" + SSD drive. There is another model out there that is organized more flat, whereas this one positions the drive above the board vertically. I place 3 M4 screw holes to…
This is a custom wall mount for the power brick that was shipped with a Reolink RLN16-410 in May 2025, in the US. Dimensions of the power brick are 7 ½" x 3 3/8" x 1". It is not Reolink branded, so a decent chance they source different…
I added a Keystone Jack so i could easily access the Network Port of the NVR.
I made this mount a 8 PoE - Dahua - NVR4108HS-8P-4KS2/L in a standard network rack. You will need to remove the screws from the side of the NVR and replace them with slightly longer ones.
The case is made for a cheap popular video surveillance board from Aliexpress (46х118mm 9CH NVR). To store the recording, I use an old solid-state hard drive without a case 65x42 mm. This model does not use screws. Assembly sequence:…
Print twice and you'll need M3x10mm screws to replace the original screws on the sides of the unit.
It's a development of a legacy model fitted to new PCB and ports layout. I include two cutouts that will let you fit-test the board without spending much time and plastic on printing the full model. To mount the NVR board to the bottom…
The model is converted to step and it's expanded to fir larger nvr pcb for 32CH and 36CHThe model is converted to step and it's expanded to fir larger nvr pcb for 32CH and 36CH
What and why I wanted a smaller case for my Reolink RLN36 NVR given it's mostly empty when only using one drive. I was already using a PoE splitter to power it from my PoE switch, so I figured I'd move that inside the box too. This is a…
My hikvision was too loud, so I added a noctua fan. Still too loud. Added a fan controller with a temperature sensor, still to loud. Placing the fan closer to the cpu and using the fan controller? cool & quiet. You need 2x m2.5 and…
10inch rack holder for NVR unifi protect instant. Printed from PETG, holes are 5.8mm, so M6 screws can be directly used. Use big zip tie in the middle, as shown on the photo. Tight litle bit more, for firm hold. NVR can easily slide…
Brackets to mount NVR under desk. I added pocket cutouts to allow TPU pads to prevent vibration being transferred to the desk.
I wanted to consolidate my home networking equipment into a single 10" mini server rack so I designed this mount for my Reolink NVR. This is a 1U mount for the Reolink RLN8-410 8ch NVR. All functionality is retained and I have a seperate…
Buttons needed to retain functionality when placing a ReoLink RLN8-410 NVR in the 10" mini rack mount I designed. Print quantity 8. RLN8-410 rack mount here:
I designed these brackets to mount a ReoLink RLN36 NVR into a 19" rack. I believe it will also work for RLN8 and RLN16 (the version with vertical vents on both sides). Please verify the model and version of your NVR before printing. I…
A quick model of two wall mounts used to mount a DVD player or NVR to a wall
Box for NVR (network video recorder) bought on Aliexpress. It is divided into two parts, one for the NVR itself and the other for the 3.5" HDD. Printing without supports, Infill: 15-20%. Share your printed model.
1U Rackmount brackets for the Vivotek ND8322P PoE NVR. Designed with 3mm thick walls for durability. Does require M3 screws to attach the brackets to the NVR. Printed on the Creality Ender 3 v2 Neo. **It is not recommended to support the…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Layer Infill: 30% Filament brand: Generic Filament material: PLA
This is bracket for NVR board NBD7808R-PL. Thank to this bracket, NVR board can be easily installed to Mini-ITX case. Print instructions Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40%
Print any filament, 0.5 width and mount nvr. Cover2 for mount rtl8812au 150mw reciever. Drill holes for ant where you need.
WIP model of my NVR Case for use with OpenIPC FPV and Ground Stations. This case is a remix of W's case that he posted on the OpenIPC Telegram page. Thx for getting me started. This case features the following: 50x50x10mm 12v fan slot,…
Brackets to mount the ReoLink NVR to a standard 19" Network Rack. They were modeled using the RLN8-410NVR. From what I can tell, this should work with the RLN16-410 as well. *NVR side screws will need to be changed to M3x10mm
The NVR is shifted forward for about 60mm, suitable for shallow rack cabinets where there's not enough depth the height is also slightly higher than 1U because it holds the NVR from the bottom, not a problem if you leave a bit of space…
A custom rackmount I made for my NVR The model is bare with no holes, as shown in the photos I drilled them out after printing. Feel free to remix this, I just found it easier to drill the holes myself. Please leave a like and rating,…
Корпус для видеорегистратора. Плата NVR с алиэкспресса. Корпус спроектирован под диск HDD 3.5 Ножки использованы от старого системного блока. Можно напечатать свои если нет других. Крышка крепится на саморезах.
What you’re looking at is a mount that allows you to mount your Reolink RL36N NVR in a 19" RACK cabinet. It consists of two symmetrical elements. As for installation, the mounts are designed for the RL36N NVR, but I’m unsure if they’ll…
This is a case for the Dahua miniature eight-channel NVR N41C2P Series. It doesn't have a place for the harddrive, but it does for the fan. It requires nine threaded heat inserts for M3 bolts, as well as 4x m3x8 bolts. You can use the…
IO Shield to mount Aliexpress NVR/NAS Board in SC505
I printed 4 of these with 4 walls, and 40% infill. 4 Top & Bottom layers. Probably overkill.
Dies ist eine Wandhalterung für das Reolink Aufnahmegerät NVR RLN8-410. Zum Drucken werden Stützen benötigt. Ich empfehle die Baumstruktur (siehe letztes Foto). Die Halterung wird mit drei Schrauben befestigt. Ich habe die Wandhalterung…
