1 / 2
Unifi Protect Instant NVR holder for RACK 10"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unifi Protect Instant NVR holder for RACK 10inch
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 224
- Wydruki
- 1
- Wyświetlenia
- 1392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (26)Powiązane
10inch rack holder for NVR unifi protect instant.
Printed from PETG, holes are 5.8mm, so M6 screws can be directly used.
Use big zip tie in the middle, as shown on the photo. Tight litle bit more, for firm hold. NVR can easily slide in/out.
FreeCAD 1.0.2 source file attached. If the model is useful for you, please donate few bucks to FreeCAD.
