Vanderhall Carmel Gauge Visors Thicker stronger Carmel set of 5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for the improved design with all the gauge visors being the same thickness for more durability.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
These are Visors for the gauges on a Vanderhall Carmel. I printed them with PETG. They are a snug slip on fit. If they loosen up over time you may need to add double sided tape. If it is too tight to slide over you can heat the bottom edge and slide them over. Recommend printing with I lined the seam up on the bottom thin area so it will be hidden under the gauges. Prints great in PETG. These are the Thicker, stronger version with the small gauge visors being just as thick as the large one. This is a set of 5 in one STL for a complete Carmel gauge setup.
These are the thicker ones as shown in the pictures on the right.