Raspberry Pi 3, 4, 5 w/ BTT TFT50 Screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure to hold the BTT TFT50 touch screen and Pi with active cooling and open to access USB / Ethernet port
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to power the touch screen and Pi with POE which provided a single wire coming to the device from the side rather than the top. Since I was cutting a hole in the side of the case I also went ahead an modified the rear panel to hold a 4mm fan.
The original directions are still the best for printing the case. If you're having problems with the case standing, the original model has a foot that can be printed to provide additional stability.
This list is all that is needed to fill the case once you print it. The screws and heatsink links are for collections giving a good sample of items for future projects!