Milwaukee M12 Nailgun Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool holder for the Milwaukee M12 Fuel 18-gauge 1-1/2" Compact Brad Nailer 2541-20.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I've been setting up my new shop and want to hang all my power tools and couldn't find a model for my nail gun. So, I made one!
It's a simple model and it has a little 1/8" slit in the center so you can level the print when hanging on a wall. The points of contact are on a diagonal for the nail gun and I didn't want to waste filament by making it big and square. Adding the slit was the best I could come up with to allow you to be able to make sure the nail gun is hung straight. The holes fit #6 pan head screws. I also put some glue on the back of the print but that was because I mounted it to some old ¼" plywood I had laying around and wasn't satisfied with the amount of bite my screws got.
Hope you guys like it, I will update this file if I make any changes. Thanks!
{Printed with the following settings}
Filament: PETG
Infill: Adaptive Cubic @ 30%
Walls: 4
Supports on