Yet another peristaltic dosing pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is another variation of peristaltic pump.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is another variation of peristaltic pump.
I used HS-755MG servo whose electronic was broken and connect power supply (5V) directly to the motor. Next "vitamins" is 6pcs of 625 ball bearing, several M5 screws and nuts, M3 threaded rod and spring as you can see on images.
As tubing is used standard silicone aquarium hose of diameter 4/6 mm (INT/EXT); servo has enough torgue to handle it.
Pump in action: https://www.youtube.com/watch?v=piET5409c1g
Print instructions
Category: DIY Print Settings
Printer Brand: Prusa
Printer: Prusa Mk1
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.2
Infill: 50%
Notes:
Printed from ABS, 5 perimeters, 5 top/bottom solid layers to ensure sufficient strength.