Siemens Bosch Freezer Top Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top hinge replacement part for Siemens or Bosch standing freezer
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 69
- Wydruki
- 2
- Wyświetlenia
- 1011
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement hinge for a Siemens standing freezer. The top right hinge of my freezer broke and I could not find a replacement part.
So I removed the left hinge, put it on a flatbed scanner, scanned it, imported the image into Inkscape, traced it, exported as SVG and loaded into Tinkercad. I had to re-trace the model there unfortunately since an imported SVG is not editable, but overall it took me 90 minutes including some “lessons-learnt”. So, only free software used.
Printed with PS in 0.25mm structural on my MK4S in PETG with supports. It worked immediately! PLA might be too brittle at -20°C, but there is no force once it is installed, so you can try.
I added the left one mirrored in Tinkercad, should work as well.
Please share your makes and comments, so I can improve this design if needed. Enjoy!