Uplift desk crossbar cable clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wire management cable clips for an Uplift desk.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 2
- Wyświetlenia
- 224
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I needed to manage the wires on the underside of my Uplift standing desk, and I didn't want to use the included adhesive cable tie mounts. So I printed these wire management clips.
There are two sizes of clips:
- Smaller size that snaps onto the inner crossbar rail.
- Larger size that snaps onto the left and right crossbar ends.
The inner crossbar rail clip is mirror-symmetric, so it can attach in either direction.
The outer crossbar end clip is not symmetric. One side has a cutout that fits over a protrusion that runs the length of the outer crossbar. This cutout side should be oriented towards the outside of the desk.
Printed in PETG with 3 external perimeters, 0% infill, and zero top or bottom layers.