Liczymy pasujące modele…
Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws. The difference between the -1 and -2…
Organizers for Uplift Desk Organizer Set These organizers fit into the Uplift Desk Organizer Set which I found to be lacking; some things would have to lie down on their side which leads to things being less-than-organized. These…
Uplift Desk Motion-X Board Stand The Motion-X Board is one of the accessories for the Uplift Desk; it's designed to help people engage more motion while standing at their standing desks. The board works best on flat surfaces like tile; on…
Replace uplift V2 standing desk logo plate with this model that can hold up to (5) USB cables. Printing this model requires supports. I tried a few different orientations that worked fine, but your mileage will vary. Do what works for…
Couldn't find a backpack hook I liked that integrated well with my new desk. Wasn't a fan of the clamp-on hooks, or the hooks/hangers that required drilling into the top. Came across another hook that utilized the two holes for the logo…
This jet-lift air collar implements well-established air-lift / jet-lift principles commonly used in Matten and sponge filtration systems, adapted specifically for 3D printing and home use . The design consists of two interlocking parts ,…
Quick headphone hanger designed specifically for Uplift Desks (25mm thick) Buy me a coffee :) - Thangs - Thingiverse
I have a custom desk in my office built on an Uplift adjustable frame. This headphone holder should work on standard Uplift desks as well. I designed to fit my two needs, the Apple AirPods Max that I use for work and recreational…
This is a headphone hook that utilizes the pilot holes surrounding the comfort keypad that comes with the Uplift sit/stand desks. This will only work with Advanced Comfort Keypad (…
I remixed this from TORO's design to fit my uplift desk. Printed in Matterhackers purple PETG at 0.2 mm layer height with supports for the little clips using SuperSlicer. Note: Make sure you've got good overhang settings tuned for the…
Like the idea of have a way to keep some of the cords out of the way in a minimalist way, used the Jarvis as a templated and completely designed from ground up, added additional slots and reduced the magnet holes to 4, also added taller…
This remix of the original design changes the screw holes to slots. This allows it to work with the flush keypad ( https://www.upliftdesk.com/advanced-comfort-flush-keypad-by-uplift-desk/ ), where the original was designed to work only…
I wanted to mount the power strip I had purchased from Amazon . I bought the 15ft version below. I haven't tested with any other power strips. I only utilized the slots closest to where you attach the power strip. I added the second two…
I modified the XBOX Elite Controller holder to fit the frame holes on the underside of a Uplift standing desk. It uses the same M8 screws provided by Uplift for their accessories. It also has a wedge on the back to provide support against…
With the 4 leg desk, there doesn't leave much room left to mount drawers to the desk, unless you want them to drop pretty low due to the cross beams the desktop sits on. To give me some drawers for smaller, frequently accessed items I…
Replace lost uplift V2 standing desk logo plate, add your own logo/text, and/or build on this model to do other functions! I couldn't find this interface as a model, so I made my own. It works like a charm. If only printing this as a…
In January of 2025 I designed and built an aluminum frame that would sit on top of my Uplift standing desk tabletop, allowing me to have a completely modular frame to customize. This is the STEP file I used to plan everything out. For…
I needed to manage the wires on the underside of my Uplift standing desk, and I didn't want to use the included adhesive cable tie mounts. So I printed these wire management clips. There are two sizes of clips: Smaller size that snaps…
I needed some brackets similar to the ones Uplift Desk sells to mount some items as well as the foot hammock. The design is similar to the items Uplift Desk sells and it does fit perfectly under the desk to the frame with some m8 x10…
I got tired of the factory grommets that came in my Uplift Desk -- the common variety where you rotate a piece inside to "clamp" the cables. The problem with the original design is that it does not hold the cables securely, and the inner…
I made the switch to suspenders and the pair of Hikers-Uplifters purchased were shorter than expected so i added about 5 to 10 mm worth of length as well as 5mm holes to attach a knife sheath to the hook.
These are cable management clips underneath a UPLIFT desk. Brackets 1 and 2 are meant to have magnets in the holes. I used 3mm and 6mm magnets. Clips have an inside dimension of 6-1/8 inches.
I created this bracket to solve the problem of my power strip hanging about an inch off the ground when standing at my Uplift desk. Printing two of these brackets allows the power strip to be mounted onto the crossbar and off the floor.
Underware mount for Uplift Desk keypad. Fits model JCHT35K2. Use 2x M4 socket head screws, nuts, and washers to attach the backplate to the keypad. Use 2x Multiconnect connectors to attach the plate to the under desk multiboard.
I designed this convenient under-desk hanger for my Flea Ukulele, below my Uplift adjustable desk. The Uplift desk frame has many extra holes available so I decided to take advantage of them to store things somewhat out of sight. Check my…
Remix of @WeldingWonder_902909 uplift cable mounts with smoothed edges
This is a simple adapter to allow the AQUANEAT 60 gph powerhead to work with a standard 1" under gravel filter plate uplift tube .. https://www.amazon.com/gp/product/B07BQTQLTD/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s01?ie=UTF8&psc=1 Print…
Alternative stopper for the track spacer. Printed on a 0.4mm nozzle @ 0.2mm layer height with 5 perimeters and no infill or top/bottom layers. 2x are needed, one for the front and one for the back.
So this is based of the Nurse Jamie Uplift massaging Beauty Roller. The significant other asked me to make it so she didn't have to spend an absurd amount of money for such a simple tool. This is the link for actual tool this is inspired…
Hello, I designed this a while back to allow my ukulele hang from the side of my Uplift desk. It's simple but works. I printed mine in Prusament Galaxy Purple in February of 2023 and it's still going strong!
Scale the center connector vertically as needed, multiple pieces may be required to fill the space between the two end parts. The end pieces still will have a bit of a corner that might need to be sanded down. Alternatively they could be…
I tried the 'arches' from the original model, but my desk is solid wood with an Uplift desk frame, so I wanted to use the existing metal frame, but the arches didn't work right. So, instead, I created a clip that takes a single magnet and…
This part is useful to replace the plastic panel of an AEG dishwasher. Ordering the original part is only possible with the whole lift-up system. You can find the right side here, but I have added the step file so you can mirror the part…
I tried the 'arches' from the original model, but my desk is solid wood with an Uplift desk frame, so I wanted to use the existing metal frame, but the arches didn't work right. So, instead, I created a clip that takes a single magnet and…
This part is useful to replace the plastic panel of an AEG dishwasher. Ordering the original part is only possible with the whole lift-up system. You can find the right side here, but I have added the step file so you can mirror the part…
I got tired of the factory grommets that came in my Uplift Desk -- the common variety where you rotate a piece inside to "clamp" the cables. The problem with the original design is that it does not hold the cables securely, and the inner…
This hook is made to screw into the existing threaded holes on the UpLift standup desks. It uses the screws that would have attached the anchor plates allowing you a lot of freedom in placement. There is a version for if you want to screw…
Wirecutter recommended the Uplift E7 LED Desk Lamp a while back and I've had it for a while. I really like it but, because of the minimalist light-bar design, when the light is positioned above eye-level, I find the glare distracting. I…
This is a simple magnetic cable management solution that is specifically sized to fit the between the frame rails of the UpLIFT Desk sit/stand frames. It may fit other desks as well. The model requires the use of two neodymium bar…
Made these speaker mounts for my uplift desk. Desktop is 1.5" butcher block. Model relies on 8mm button head socket screw with 8mm nut. I also included holes to screw the mount to the wooden desk top. However it fits well enough were I…
Another mounting bracket for uplift desks. I printed it with supports on the underside so it could have a more shallow angle. I used PLA with 30% infill & gyroid. Don't skimp on the infill - or you'll just be reprinting it.
This clip allows you to connect your standing desk cable chain to the center frame of an Uplift standing desk.
This design was born out of the fact the the factory wire grommets on my white uplift desk were not the same color white as my desk. I also wanted to extend the USB ports from the back of my computer to the top of my desk for easier…
I had been looking for a way to mount my headphones to the side of my Uplift desk. There are lots of options that clamp to the desktop, or screw into the bottom, but I didn't want to permanently alter the desk. There are steel rails along…
A printable stand to hold the magnet up in place of the glass dome used in the uplift sculpture. Here is a link for those who dont know what Im talking about I printed all pieces on a prusa mini, PLA, 0.6mm nozzle, 0.3mm layer hight, and…
The Uplift V2 standing desk has a logo plate on either side. If you remove the name plate there are two M6x10mm pan head screws. Attach this hook where the name plate was using longer M6x20mm pan head screws. I routinely hang my…
I love my uplift desk, however I'm frustrated with the supplied cable management solutions. The 3M adhesive ties constantly fall off. To solve this, I designed a simple wire management clip that snaps onto the crossbar components under…
This fits the control panel for my Uplift Desk - had a problem with the cat hitting the buttons and causing mayhem. Fits the Angled Comfort Advanced Keypad. Created in Solidworks and printed on my Bambu X1-Carbon in Jade White Matte PLA
Convert your Uplift Desk cubby into a more useful drawer I bought an Uplift Desk, but I found the cubby above my computer tower bracket to be pretty much useless. The opening wasn't tall enough to be able to reach anything that isn't…
This is a cable management tray designed for an uplift desk. It is designed to mount on the cross bars between the legs which support the desktop (the long way). My desk uses a Uplift 900 adjustable base, which has a channel created by…
Uplift standing desk accessories such as the keyboard tray mount to a track that installs under the desk. These brackets are lower profile than the track spacer brackets sold by Uplift. This allows for the keyboard tray to mount closer to…
This is a hook I modeled after the desk hook that came with my uplift desk. My coworker didn't get one with his for some reason, so I modeled one for him.
