UpLift 4-Leg Standing Desk Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Undermount drawers for Uplift 4-leg Desk
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With the 4 leg desk, there doesn't leave much room left to mount drawers to the desk, unless you want them to drop pretty low due to the cross beams the desktop sits on. To give me some drawers for smaller, frequently accessed items I created some drawers.
The drawers are only 80 mm in depth, not going past the front cross bars.
Both drawers use the same mounting bracket, which will require 3 wood screws for each drawer needed. I used 3/4". Use screw lengths smaller than the thickness of your desktop.
3 Files included:
- Mounting bracket - print on its side - 260mm(w) x 80mm(d) x 40mm(H)
- Short drawer - 250mm(w) x 80mm(d) x 45mm(H)
- Tall drawer - 250mm(w) x 80mm(d) x 75mm(H)
I printed the drawers with no supports. Made the side gabs large enough that if there are any minor bridging issues the drawer will still fit with minimal effort.