Uplift Desk Power Strip Mount Point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to mount the power strip I had purchased from Amazon. I bought the 15ft version below. I haven't tested with…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I wanted to mount the power strip I had purchased from Amazon. I bought the 15ft version below.
I haven't tested with any other power strips. I only utilized the slots closest to where you attach the power strip. I added the second two afterwards, but haven't tested to see if their location is good.
I believe the width of the screw needed is 8mm and washers are required so you can screw it in fully.
https://www.amazon.com/gp/product/B09MK6WN1Y
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
20
Filament: inland PLA gray
Category: DIY