Uplift Desk Power Strip Mount Point
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to mount the power strip I had purchased from Amazon. I bought the 15ft version below. I haven't tested with…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 73
- Makes
- 1
- Views
- 870
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I wanted to mount the power strip I had purchased from Amazon. I bought the 15ft version below.
I haven't tested with any other power strips. I only utilized the slots closest to where you attach the power strip. I added the second two afterwards, but haven't tested to see if their location is good.
I believe the width of the screw needed is 8mm and washers are required so you can screw it in fully.
https://www.amazon.com/gp/product/B09MK6WN1Y
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
20
Filament: inland PLA gray
Category: DIY