Audiobook player
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An audiobook player built on top of the Muse Luxe Speaker.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I needed an easy to use audiobook player for a visually impaired family member — this project is the result. It's a button pad with big buttons that clips onto and controls a Muse Luxe Speaker. Communication between the pad and the speaker happens over espmuse's grove connector.
Required hardware:
- 6 x Cherry MX switches.
- 1 x EC11 rotary encoder.
- A micro-controller that runs on 3.3V, supports I2C and has at least 6 GPIOs for the buttons and encoder (I used an old Arduino Nano V3).
- Grove connection cable (I regret crimping my own).
- Muse Luxe Speaker
Everything is hand-wired and glued in place. The pinout can be determined from the firmware of the MCU or the firmware can be modified to match your pinout.
Printed in Bambu PLA-CF Lava Gray. PolyTerra PLA Charcoal Black also works great for this print. Parts with text were printed with a 0.4 nozzle, while the rest was printed with a 0.6 nozzle. The debossed areas on the key caps were filled with nail polish.
The firmware for the MCU and ESP32 in the Luxe speaker can be found here:
- https://github.com/gvalkov/espmuse-audiobook-player-firmware
Work in progress …