PB Swiss 3212 LH-10 Hex Set Gridfinity Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bin for the hex key set to rule them all, the PB Swiss Tools 3212 LH-10.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
Gridfinity bin for the PB 3212 LH-10 hex key set. The bin is 2x6 and 4 units high (28 mm). The tools can be lifted out easily. The bin is stackable, too.
Also check out the corresponding bin for the torx key set, the PB 3411.H 6-25.
Printing
To reduce filament usage a bit you can print this with:
- 2 walls
- 2 bottom layers
- 3 top layers
- 5% cross hatch infill
The print in the photo was done with a .4 nozzle, but it should work perfectly fine with a .6 nozzle, too. The filament I used is Gray Extrudr PLA NX2. I recommend printing directly from the .step file, I only included the .stl so Printables can render it (they are identical though).
Dimensions
Magnets
The model does not include magnet holes; the keys are heavy enough to not make the bin move or lift out when removing a piece. If you do want magnet holes though, you can add them yourself using the STEP file.
Version: 3