PB Swiss 3212 LH-10 Hex Set Gridfinity Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity bin for the hex key set to rule them all, the PB Swiss Tools 3212 LH-10.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 41
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v2.0
Gridfinity bin for the PB 3212 LH-10 hex key set. The bin is 2x6 and 4 units high (28 mm). The tools can be lifted out easily. The bin is stackable, too.
Also check out the corresponding bin for the torx key set, the PB 3411.H 6-25.
Printing
To reduce filament usage a bit you can print this with:
- 2 walls
- 2 bottom layers
- 3 top layers
- 5% cross hatch infill
The print in the photo was done with a .4 nozzle, but it should work perfectly fine with a .6 nozzle, too. The filament I used is Gray Extrudr PLA NX2. I recommend printing directly from the .step file, I only included the .stl so Printables can render it (they are identical though).
Dimensions
Magnets
The model does not include magnet holes; the keys are heavy enough to not make the bin move or lift out when removing a piece. If you do want magnet holes though, you can add them yourself using the STEP file.
Version: 3