1 / 3
Climbing Shoes Dryer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed for drying your rock climbing shoes after getting sweaty. It can also be used for normal shoes.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Shoe Dryer
This project was created so I can easily dry multiple pairs of climbing shoes, and I needed an excuse to make a custom solution. It works well at drying climbing shoes and also works with street shoes.
Each unit is 3D printed, and requires a fan, power supply, knurled inserts and a few M4 screws to put together. I added a timer relay so I can press the “start” button and it'll turn off automatically in a set time (~6hrs).
Parts List
- 50mm 5015 Blower Fan 24V
- DROK Time Delay Relay
- 2A 12V - 24V power supply (12v is much quieter, but less air flow)
- Power barrel jack (optional, or just cut the power supply leads)
- Various wire (~22 gauge)
- M4 screws (per unit: 2x 25mm, 3x 8mm, 1x 12mm)
- Wood/mounting screw (per unit: 2x small wood screw)
- M4 knurled brass inserts
- Screw Terminal Block (optional)
- JST Connector Kit 2.54mm 2 Pin (pigtail for fan) (optional)