1 / 3
Climbing Shoes Dryer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is designed for drying your rock climbing shoes after getting sweaty. It can also be used for normal shoes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Shoe Dryer
This project was created so I can easily dry multiple pairs of climbing shoes, and I needed an excuse to make a custom solution. It works well at drying climbing shoes and also works with street shoes.
Each unit is 3D printed, and requires a fan, power supply, knurled inserts and a few M4 screws to put together. I added a timer relay so I can press the “start” button and it'll turn off automatically in a set time (~6hrs).
Parts List
- 50mm 5015 Blower Fan 24V
- DROK Time Delay Relay
- 2A 12V - 24V power supply (12v is much quieter, but less air flow)
- Power barrel jack (optional, or just cut the power supply leads)
- Various wire (~22 gauge)
- M4 screws (per unit: 2x 25mm, 3x 8mm, 1x 12mm)
- Wood/mounting screw (per unit: 2x small wood screw)
- M4 knurled brass inserts
- Screw Terminal Block (optional)
- JST Connector Kit 2.54mm 2 Pin (pigtail for fan) (optional)