Minimalist Soldering Fan Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SF-001 A compact minimalist soldering fan on a gridfinity base
- Ocena
- 4 / 5
- Polubienia
- 100
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 1685
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is my soldering fan, i wanted something that had a minamilist sort of look, could fit on a gridifinity base, and was no bigger width and depth wise than standard gridfinity so that things could stack next to it and in front of it without impeding on the squares around it.
BOM (Bill of Materials)
- Standard 120mm computer fan
- PMW 12v Motorcotroller like this one - https://www.aliexpress.com/i/4000768252734.html
- 2 x 3mm heat inserts and 10mm screws for them.
- 4 x 3mm x 5mm self tapping screws.
- 12v adaptor for power supply
- 10mm thick carbon filter sheet
Assembly
Assembly is pretty straight foward, because the PMW controller i used is designed to change a motors direction i just permantently bypass the switch as i show in the pictures so it will only ever go in the direction that works. Apart from that just wire the 12v to the controller and the fan to the controller output. If this design gets some traction i'll upload some more of the steps i took and more of the build