1 / 3
Lulzbot Taz 6 BTT SKR 1.4 turbo mod — zdjęcie 1
1 / 3

Lulzbot Taz 6 BTT SKR 1.4 turbo mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

mount for skr 1.4 turbo board, using the standoffs for the rambo board. firmware…

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

mount for skr 1.4 turbo board, using the standoffs for the rambo board. firmware here:

https://github.com/hazyavocado/Taz6-SKR14turbo

check out the branch "no bl touch" for manual leveling, or use the default branch if you want to use bltouch.

configured for hemera extruder, tmc2209 drivers, sensorless x/y homing, no cooling part fan, manual mesh bed leveling. set the bed mesh once and reuse it each time, saves lots of time not having to re-mesh before every print.

just plug in the stepper motors, min z switch, heaters and temp sensors. fan uses heater 1 connections. you can pull off the plastic around the pins on the rambo board so you don't need to rewire anything or cut any wires, this mod is fully reversible.

i recommend buying an external mosfet to control the heated bed.

Print Settings

Rafts:

No

Supports:

No

**Resolution:**

200

Infill:

20

**Filament:** PolyMaker PLA

Category: 3D Printer Parts

Tagi