Lulzbot Taz 6 BTT SKR 1.4 turbo mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mount for skr 1.4 turbo board, using the standoffs for the rambo board. firmware…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
mount for skr 1.4 turbo board, using the standoffs for the rambo board. firmware here:
https://github.com/hazyavocado/Taz6-SKR14turbo
check out the branch "no bl touch" for manual leveling, or use the default branch if you want to use bltouch.
configured for hemera extruder, tmc2209 drivers, sensorless x/y homing, no cooling part fan, manual mesh bed leveling. set the bed mesh once and reuse it each time, saves lots of time not having to re-mesh before every print.
just plug in the stepper motors, min z switch, heaters and temp sensors. fan uses heater 1 connections. you can pull off the plastic around the pins on the rambo board so you don't need to rewire anything or cut any wires, this mod is fully reversible.
i recommend buying an external mosfet to control the heated bed.
Print Settings
Rafts:
No
Supports:
No
200
Infill:
20
Category: 3D Printer Parts
