Counting matching models…
A simple mod to cool your fans on your octopus board Files: The printed files have fan holes with 3mm diameter so you can tap screws into the plastic. The CNC files have fan holes with 2.6mm diameter so you can thread the metal. Bill Of…
This is Lulzbot's Taz 6 Filament Feed Tube and Mount. Found I could easily use this on other printers. Thanks LulzBot for the simple functional design! Category: 3D Printer Accessories
This is a camera mount for the Raspberry Pi camera to mount on the side of your LulzBot Mini. The build requires 2 M3x8 screws and a M3x4 A M3x2 grub screw is optional to retain camera a little tighter. Category: 3D Printer Accessories
I will include more info later as I did in this X axis mod: https://www.printables.com/model/850220-lulzbot-taz-6-x-linear-rail-mod These are the rails that I used: https://a.co/d/2UxHuFp Onshape CAD model thanks to Engineerable:…
Make sure to print in the same orientation as it would normally be when you open it in your slicer. For the “indicators” , I paused it right before the arrows started printing so I could swap the filament to the red filament and make it…
This is a mount that fits a standard Taz gantry carriage for the e3D Hemera. Depending on the version of Taz or Taz Clone you may not have bed leveling so I added the ability to add an 18mm inductive sensor with this mount. Adapter for…
The original fan shroud file is open-source from Lulzbot. I made this remix of Luddite's model to fit with upgraded fans by bringing the sensor forward off the shroud. This will clear an 80mm fan upgrade on the Dual extruder, as well as…
This is a extruder mount for a Lulzbot Mini 2. This mount lowers the extruder mount so you can use use a 1.75mm Titan Aero rather than the stock 2.85mm version. Print instructions Category: 3D Printer Extruders
Modified the adapter to take a 5/16 rod with out having to tap it. Just place a nut on both sides. Also added a counter bore for the mounting bolts so you can use the original bolts. Print instructions Category: 3D Printer Parts
mount for skr 1.4 turbo board, using the standoffs for the rambo board. firmware here: https://github.com/hazyavocado/Taz6-SKR14turbo check out the branch "no bl touch" for manual leveling, or use the default branch if you want to use…
BOM 6x m3 inserts (4 for the toolhead, two more for the optional accessory mount on the left side of the adapter) 3x M6 inserts (original toolhead used M5 screws but the holes in the carriage are extremely oversized, M6 is a better…
This is a bracket I designed to replace the wiper that comes standard on a Lulzbot Mini 1. It works in conjunction with a silicon wiper for a Bambu A1 that can be easily sourced for a few dollars on Amazon or Bambu's website. It may be…
This is a printable replacement for the RJM-01-08 slide bearings used in lulzbot mini printers. I've modified it with a helical inner pattern to increase the contact area and support that it provides so it'll be fairly durable when…
a replacement nozzle wiper for the Lulzbot Mini v1 that uses a Bambu A1 nozzle wiper. please see the original model for more details including gcode.
I created this wiper strip holder for the right side of my Taz5 printer. The printer allows the head to go off the right side of the bed enough that you could wipe you head. As soon as I made this I decided to use a different method to…
I created this wiper strip holder for the right side of my Taz5 printer. The printer allows the head to go off the right side of the bed enough that you could wipe you head. As soon as I made this I decided to use a different method to…
Anti-vibration feet for the Lulzbot Mini 1. They help absorb some of the vibrations on this less advanced printer. Printed in ABS at 50% infill (layer lines in the images are a little rough before a rebuild). Stiffer spring on the bottom…
This is a replacement for the stock Lulzbot Mini 1 filament spool arm. I added a little flare to the new arm that helps its rigidity. The roller is supported by two 608 bearings. 2x 608-2RS bearings 22mm x 7mm, 8mm bore. Printed in ABS on…
Modeled this fan mount for a tutorial I wrote. The mount is designed to perfectly fit a Suscool 81 80MM PC Fan from Silverstone Technology. This mount utilizes the existing mounting screws for the wire hold downs on the AO-100.…
Lulzbot ships a handy and quite complete tool kit with their printers. Unfortunately they come stored in a zippered pouch that makes finding tools a bit of a hassle. I designed this desktop tool holder with specific slots for each of the…
Edit: Version 1 collided with the top of the printer on tall prints. Replaced with V2, which also has been strengthened to prevent flex. Version 7 now includes a tube holder so it doesn't rub against the side like in v2. After failing to…
A simple pair of indicators that show that your X-Axis is still lined up. Fit the indicators[1] - make sure that the one on the leadscrew is high enough to avoid clouting the fixed indicator. Don't snug down the one on the leadscrew yet.…
Lulzbot say that one should level the X-Axis by measuring from the top of the axis rods to the top 20mm rails. I've always found this awkward to do and puzzling as the point of reference should surely be the bottom rails of the printer…
Will work with most 1/4"-20 phone/ipad mounts. Here is a short video of a timelapse using the rig. https://www.instagram.com/p/BebecxxF5yR/?taken-by=jocomakerspace Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports:…
These are the files for the custom Arduino fan controller case I built for my LulzBot Mini. Full write-up, schematics, parts and code are at…
Needed a mount for my Logitech C270 and LEDs for monitoring / recording prints using OctoPrint. Note, this requires a mount for the C270 (or your IP cam) as well as an interface to the mounting arm. I used flex arm parts and did some…
This is a model of my LulzBot TAZ 5 3D printer. https://www.tinkercad.com/things/eT62iSazZmS-3d-printer-taz Update, I made some minor changes to the model after closly examening my real TAZ printer. Print Settings Printer Brand: LulzBot…
This is a model of the popular TAZ 6. https://www.tinkercad.com/things/3cLJQDUaVT9-3d-printer-taz-6 Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
This is my TAZ model, but in a keychain form. That way you can show off you love of LulzBot or 3D printing anywhere! Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: Keychains
These are models of the popular LulzBot Mini and the CES limited edition Mini from CES 2018. UPDATE I added models of the Mini and CES Mini with the new LCD. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D…
This is a model of the original TAZ from LulzBot Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
This is a model of the LulzBot Bioprinter Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
These are models of the TAZ Pro and TAZ Pro XT printers from LulzBot Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Doesn't Matter Supports: Yes Category: 3D Printers
This is a model of LulzBot's TAZ Sidekick printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Doesn't Matter Supports: Yes Category: 3D Printers
December is upon us. That means it is time to start my Christmas designs. I am kicking things off with my entry for the TinkerChristmas contest. This is an ornament I made based off my LulzBot TAZ 3D printer. I uploaded a version with a…
This is the TAZ 6 3D printer in ornament form. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: Decor
LULZBOT 747 Filament guide that clips on filament sensor for second spool of filament for 289/747/TAZ 3D printer. Hope you enjoy :P
I took the awesome spool holder design by Dereksunday and modified the mount to fit the new Sidekick. It still has the guides for zip ties as well as holes for mounting with screws. Category: 3D Printer Accessories
The goal is for the TAZ to accept these screws: http://store.makerstoolworks.com/motion/z-axis-lead-screws-and-nuts-set-of-2/ This has not been tested as I don't have the parts yet. You will want to buy 5x6.35mm couplers:…
The Lulzbot Taz Dual Extruder V3 is a great tool head. And as long as you use the Brands of fillament that they suggest you are going to be ok. However, if you want to use PLA from other brands the stock 5v cooling fan on top of the heat…
I got frustrated with the cunductive probe on the Lulzbot Taz 6 never being able to compensate for my potato chip bed, failing to calibrate because there's plastic on the tip, breaking off and wearing through the wiper pads, etc. Print in…
I wanted to use the Biqu H2 dual-gear extruder on my Taz 6, and the existing mount was not compatible with the stock bed leveling due to the position of the fans. So I took the official M175v2 toolhead files, and modified them to…
This is a modification for the spool holder on a Lulzbot Mini. I started checking them out when I had a bit of a feed issue with the standard holder. Of course it turns out the feed issue was caused by the tail of the filament sticking…
This is a little addition to the Filament Extruder Detector v3 by flipper: http://www.thingiverse.com/thing:454584 I noticed that during "intense" printing sections (where the toolhead jitters rapidly) the sensor had difficulty making an…
This is simply my arrangement to fit three of the Prusa RC2 face shields on my Lulzbot Taz 5. This is not my design. For more details, and important printing, safety, and contamination prevention information, please see the original file…
This mod enables you to mount two BondTech BGM Dual drive extruders and a BL Touch probe to a Lulzbot TAZ 1 through 5. (It will also probably fit on a TAZ 6.) This mod also converts the TAZ to use 1.75 mm filament. Print instructions This…
This is a one-piece mount for using the E3D Hemera/Hermes on the LulzBot Taz 6. Its dimensions are based on the official E3D mount . You don't need the separate Taz 6 Universal Mount if you're using this mount. I also modified the blower…
Pretty basic- I had issues with the original spool arm on the Lulzbot Mini and its hard edges causing binding as filament spools unwound during printing. This model is just a modified version of Lulzbot's original spool arm design with a…
Cut from 6mm acrylic, because it's what I had on hand. 3mm would be plenty. NOTE: you lose the ability to carry from the top handle that is installed under the top level of the sheet metal frame.
This is a redesign of the v2 dual extruder to place the nozzles closer together and also resolves heat creep on the v2 Please note you will need a strong fan for the hotend. I used this one AFB0424SHB Delta Electronics | Fans, Thermal…
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this…
This project adds anti-backlash and anti-wobble similar to that found on the Lulzbot TAZ printer to the older Lulzbot A0-10x designs. It will also likely fit some Mendelmax 1.5+-ish Derivatives. With the addition of a second Acme nut, a…
The following project will allow you to install 2 fully supported THX Linear Rails in place of the Z Axis 8MM linear rod found on the Lulzbot AO-10x series printers. It also upgrades the Z endstop for additional precision. PREREQUISITES:…
This project adds a bolt on, no firmware modification required fully supported X axis to the Lulzbot Taz 4 and 5 printers in place of the existing bearing rod. Build thread is here: https://forum.lulzbot.com/viewtopic.php?f=16&t=2252…
This project adds a bolt on, no firmware modification required fully supported Y axis to the Lulzbot Taz 3, 4 and 5 printers in place of the existing bearing rods. This project is compatible with the layout of the Taz 3. You will need to…
This modification adds Openrail extrusions in place of the existing Lulzbot Taz 4 or 5 smooth Z rod. I will post a parts list soon. It basically just needs 8 of the mini wheels, with 4 mini wheel eccentrics and 4 6mm spacers. Extrusions…
This project is aimed at eliminating the minor Z banding or Z wobble you may encounter when printing with the stock Taz 4 or Taz 5 printers. This is a bolt on upgrade, no firmware or frame modifications are required. Build thread is here:…
This is a set of end mount blocks for an Igus 10 x 15mm cable chain with end mounts. These will fit a stock Taz 1-5 with no modification.You will need 6 M3 heat set inserts ( http://www.mcmaster.com/#catalog/119/3267/=zw8u0v ) , 6 M3…
This is just a bracket to mount a Lulzbot mini style nozzle wiper (which you can download from here: http://download.lulzbot.com/Mini/1.01/production\_parts/printed\_parts/wiper\_mount\_Mini/ You will need two m3 heat set inserts, a pair…
This project contains the Cable chain anchors for the X and Z axis Openbuilds retrofits I created for the Lulzbot TAZ series of printers. Unlike the Y axis pieces( http://www.thingiverse.com/thing:1145951 ) , these units are highly…
This is a variant of the taller extruder modification and my reinforced extruder carriage designed to work with the E3Dv6 using a 6mm metal mount plate. It retains the stock E3DV6 fan mount (switch to a 5v 30mm fan though for use with a…
I thought the Taz 6 had 12mm Y rails in the stock configuration. It turns out that it doesn't. So, this project aims to create a set. This replaces the existing stock 10mm rods wiht 12mm rods. You should consider the…
I really like the greg/wade style extruders overall, and the lulzbot variant is the best one out there of that type. That being said, I hate, loath and otherwise utterly dispise the stupid idler arm itself for one reason. Every time I…
Here This is based off the latest 0.4 Beefy lulzbot Idler variant (which compared to 1.4c is basically 2.0 anyways), licensing is Creative Commons Open Source Attribution as usual. Please feel free to use this part in any manner you see…
This is the Taz 6 specific variant of the Openbuilds X axis rail modification, Anti-wobble edition. For the Non antiwobble edition, please try here: https://www.thingiverse.com/thing:2692604 Instructions are still being worked on. it's…
This is the Taz 6 specific variant of the Openbuilds X axis rail modification - non antiwobble edition. For the Anti Wobble equipped version of this project, please check out: https://www.thingiverse.com/thing:2690825 Instructions are…
This project allows you to use silicone rubber fuel tubing in place of your springs. The tube I am using was intended for a chain saw, and is about 1/4" in diameter. You need 4 identically cut tube lengths about the same length as the…
This is the beta release of the new Mini Openbuilds project. Right now I have the prototype fitted to my new Mni 2.0 frame I am building. I have a mini 1.03 in house as well that I am waiting on parts for. Expect pictures of that…
For those that do not wish to upgrade to the openbuilds Y rails project but still want a belt tensioner, here is the belt tensioner portion of the project for a stock Mini. This is modled off the Mini 2 idler end, but should fit both the…
Have you ever gone to remove a part from your 3d printer and burned the crap out of yourself? I sure have! This project started out life as a front roller mount for my as yet to be published conveyor belt bed project. I found that the…
This is a flexible filament guide for a Taz printer (mine is a Taz 5) using pulleys instead of the typical guide tube. I have found the tube creates too much friction with some soft filaments and this can lead to under extrusion. The…
This is a removable build bed design that you can make as an upgrade for your Taz 4, Taz 5 or Taz 6. It is comprised of a precision machined, level adjustable, ultra lightweight aluminum tray with magnets and separate square glass bed…
This is a handle that can be bolted to each side of my Lulzbot enclosure for Taz 4 or 5 (found here: http://www.thingiverse.com/thing:746922 ) for easy lifting and moving. Instructions I used 2 shells, 4 layers top and bottom, 40% infill…
This thing was inspired by the Lulzbot Taz Enclosure by MrMcGuire. I've attached a dxf file of the panel details of my enclosure make, so you may have them laser cut, or you can use it as a guide to cut them yourself.* Please note the dxf…
I had bearings rubbing on the idler arms, and wanted captive nuts to hold the set screws for the small gears.
The modular bed corners weren't tall enough on my printer. I initially fixed this by printing a 1mm plastic washer. This modified bed corner is more stable. This model was provided to me in a Lulzbot support ticket. From Lulzbot Support:…
How to use Hemeara XS REVO on a sidekick 289 & 747 or any other Lulzbot This step is after wiring! This link has the PIN Assuagement Diagram https://ohai.lulzbot.com/project/he-toolhead/hot-end-tool-head-assembly/ PS: Stepper Motor wiring…
Modification of my pervious design to add support for the Revo and BL Touch. When using with the standard V2 , mount the BL Touch above the bracket. For the Revo, it may be necessary to mount it below the bracket to account for the longer…
This mount will let you mount the BondTech extruder with a E3D (or clone) Hot end on your Taz 4-5 so that its and direct drive set-up. All you have to print are the two pieces. Heat up the nut inserts from your old fan mount holder and…
This bracket and firmware provides support for the BLTouch in the Lulzbot Workhorse 3D printer when used with the ITWorks print head: https://itworks3d.com/product/e3d-titan-aero-pro-toolhead-for-mini-2-taz-workhorse/ Edited source files…
Important note: This project is fairly out of date now. The Taz 6 is no longer being sold, the BLTouch is at version 3 (not compatible with firmware for version 2), and Marlin itself has moved way beyond this version. If you want to view…
This spool holder is designed for the TAZ-6 printer, but will probably work on a variety of others. I have included the Solidworks source files for those who want to modify. To use this you make one Spool Holder and one Cap. Then cut a…
"5th generation" drop in E3D v6 mount for Lulzbot taz. Upstream didn't actually fit my E3D v6 mount at all, so I changed it. This one also uses captive nuts rather than th threaded metal inserets. Original by chiphead420. Print…
This is my tool head for a Lulzbot TAZ 6. It is for 1.75 millimeter filament and uses a BMG style extruder with a Haldis Red Lizard hot end. A standard V6 hot end would probably work as well. I have also included my custom adjustable BL…
Hello, I loved the original flex plate holder for my Prusa that I wanted one similar for my Lulzbot Mini 2 Flex Plate system that I got from Printed Solid. Print instructions Pretty simple print. I just went with 0.3mm layer height since…
This is the cover that goes over the LCD Controller on a Lulzbot Taz 5. We have multiple printers at work and wanted to "name" them so we know which is which. Add whatever text you want (or not) to this. Category: 3D Printer Parts
I noticed that the filament guides on my Lulzbot printers were getting chewed up being pulled into the extruder so I created a small cap to fit over the end of the nylon tubing. This provides a stronger end while also preventing it from…
LulzBot TAZ 6 Config Bundle We recently received a donation of a Taz 6 3D printer to add to our fleet of 3D printers. Unfortunately, PrusaSlicer (as of 2.6.0) only has premade configs for the LulzBot TAZ 6 Aero and doesn't have profiles…
Two variations of a BLTouch mount. The front mount allows for reaching most of the bed with the probe, but puts the sensor further out on the Y axis, so if you have any X axis twist, you'll need to enable X axis twist compensation in your…
There is no parametric model of the herringbone small gear so I remodeled it! Mod it to your needs.
There is no parametric model of the herringbone large gear so I remodeled it! Mod it to your needs.
This is a mount for the BLtouch on the original Lulzbot Taz 6 single-extruder. It mounts on the hot-end cooling fan duct on the right side tucked in nice and safe. I built it after I used someone else's design that mounted to the left…
My Lulzbot TAZ been served me for quite some times, old slug but just keep going and built like a tank.. this is my tribute for them, a simplified LULZBOT logo in suspended string artwork style, using bridges for the strings, don't need…
I liked the original model, but was disappointed when I printed it that the spaces for a ‘skate bearing’ didn't fit the 608 bearings I had on hand. So I made some small adjustments. The original seemed to expect a 19 mm bearing with a 5…
this is meant to be an upgrade for anyone's mini 1 so if you choose to take on the challenge good luck!! it works SO much better then the original tool head
The Hemera XS uses a thinner stepper and all the mounts I found are for the older model.
Rocktomek is here to join your next tabletop gaming session, or watch over your 3D printers as they Make Everything! Print Settings Printer: LulzBot TAZ Pro S Filament: 3D Fuel Standard PLA Rafts: No Supports: No Layer Resolution: 0.20mm…
V2 Update: No seam This is my M175 style fan shroud for Lulzbot SE Tool Head, which is found on the Lulzbot Mini 2 and other Lulzbot printers. The M175 tool head has a fan duct that allows a clear view of a print as it happens, so I…
A fun fidget to print which shows many of the cool geometries that can be produced via 3D printing. Print Settings Printer: LulzBot TAZ SideKick 747 Filament: 3D-Fuel Standard PLA Rafts: No Supports: No Resolution: 0.18mm Infill: 20%
Do you have the Lulzbot Mini LCD upgrade? Do you not like the idea of mounting it over the front of the printer covering up the view inside or getting in the way of your enclosure? Well here is the solution for you. This allows you to…
