1 / 1
Lulzbot Taz 6 Extruder EZABL Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the stock extruder bracket on the Lulzbot Taz 6 adding a wing that you can atatch an 18mm EZABL with
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got frustrated with the cunductive probe on the Lulzbot Taz 6 never being able to compensate for my potato chip bed, failing to calibrate because there's plastic on the tip, breaking off and wearing through the wiper pads, etc.
Print in ABS for best results that will last or PLA if you want.
Model based off of the official open source models from Lulzbot with the built in supports removed.
As pictured printed on a Stratasys F170 in ABS with an EZABL Pro.