Top Cover for Lulzbot A0-100 RAMPS 1.4 Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this yet, so if anyone does before I get a chance, please let me know if it works and or what I should do differently next time.
Print instructions
Category: 3D Printer Parts Summary
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this yet, so if anyone does before I get a chance, please let me know if it works and or what I should do differently next time.
Instructions
I took the STL files for the base Lulzbot from here: http://download.lulzbot.com/AO-100/hardware/printed\_parts/stl/ Converted it to Autodesk inventor using their STL to solid thingy, then built a top that seems to look like it might work.
Use the Ramps_mount4.stl file. It's now the correct size, and flipped on the correct side.
You'll need two fairly long bolts with nuts for the cover itself, a 40mm fan (I have no idea where it plugs in) and 4 shorter bolts and nuts for the fan. I found I had to clearance around the microSD card to make it fit. My RAMPS board also apperently has a reset switch of some sort near the fan, you may also have to notch around that. Everything else seems to fit fine.