Top Cover for Lulzbot A0-100 RAMPS 1.4 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this yet, so if anyone does before I get a chance, please let me know if it works and or what I should do differently next time.
Print instructions
Category: 3D Printer Parts Summary
This is an attempt at creating a cover that will fit the Lulzbot AO-100 RAMPS 1.4 base. This is also my first STL file, and my 3d skills are a little rusty, so my appologies in advance if anything is off. I haven't tried printing this yet, so if anyone does before I get a chance, please let me know if it works and or what I should do differently next time.
Instructions
I took the STL files for the base Lulzbot from here: http://download.lulzbot.com/AO-100/hardware/printed\_parts/stl/ Converted it to Autodesk inventor using their STL to solid thingy, then built a top that seems to look like it might work.
Use the Ramps_mount4.stl file. It's now the correct size, and flipped on the correct side.
You'll need two fairly long bolts with nuts for the cover itself, a 40mm fan (I have no idea where it plugs in) and 4 shorter bolts and nuts for the fan. I found I had to clearance around the microSD card to make it fit. My RAMPS board also apperently has a reset switch of some sort near the fan, you may also have to notch around that. Everything else seems to fit fine.