ESP ArtNetNode (ArtNet DMX/Pixel interface) - slide-in holder/bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slide-in and locking holder/bracket for an easy attachment of the self-made ESP ArtNetNode.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
To have an easy attachment to my DJ booth and the possibility to release/remove my self-made ESP ArtNetNode when needed I created this model. It was designed to fit the Hammond 1455J case which houses the ESP ArtNetNode.
The case can be pushed into the holder and gets locked by two snap-fit joints which are easily accessible at the front for releasing the case again.
Additionally a SMA WiFi antenna mounting hole was placed at the front for bringing the WiFi antenna which would sit in the back to the front.
The holder can be mounted to any surface by M3 screws or cable ties.