1 / 1
Ultralightweight mount for BetaFPV C03 (15 deg)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultralightweight, virtually indesctructible mount for attaching the BetaFPV C03 cam to TinyWhoops. To be printed in PP.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (10)Powiązane
This is my take on a ultralightweight mount for the BetaFPV C03 camera (which is my camera of choice for lightweight whoops since the TW Pinch is rather difficult to get in EU at reasonable cost due to shipping).
- Weight: ~0.37g
- Camera retention: friction fit
Printing instructions:
- Requires 0.25mm Nozzle
- To be printed in PP (I recommend FormFutura Centaur)
- Requires Supports, removal requires tweezers and small clippers
- Prusa 0.12mm structural profile worked well for me
Whoop build in picture:
- NBD LiteAF Frame
- BetaFPV Air G4 5in1 Flight Controller
- BetaFPV 0702 II 30000kV Motors (2 PEEK screws, one metal)
- HQ Ultralight 1.2x1.2 2-Blade Props
- BetaFPV C03 Camera
- Weight: ~16.1g, could be reduced by using a different pigtail, lighter coax wire on the VTX antenna and full PEEK screws