1 / 1
Ultralightweight mount for BetaFPV C03 (15 deg) — image 1

Ultralightweight mount for BetaFPV C03 (15 deg)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ultralightweight, virtually indesctructible mount for attaching the BetaFPV C03 cam to TinyWhoops. To be printed in PP.

Rating
0 / 5
Likes
5
Downloads
95
Makes
0
Views
590
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This is my take on a ultralightweight mount for the BetaFPV C03 camera (which is my camera of choice for lightweight whoops since the TW Pinch is rather difficult to get in EU at reasonable cost due to shipping).

  • Weight: ~0.37g
  • Camera retention: friction fit

 

Printing instructions:

  • Requires 0.25mm Nozzle
  • To be printed in PP (I recommend FormFutura Centaur)
  • Requires Supports, removal requires tweezers and small clippers
  • Prusa 0.12mm structural profile worked well for me

 

Whoop build in picture:

  • NBD LiteAF Frame
  • BetaFPV Air G4 5in1 Flight Controller
  • BetaFPV 0702 II 30000kV Motors (2 PEEK screws, one metal)
  • HQ Ultralight 1.2x1.2 2-Blade Props
  • BetaFPV C03 Camera
  • Weight: ~16.1g, could be reduced by using a different pigtail, lighter coax wire on the VTX antenna and full PEEK screws

Tags