Counting matching models…
BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
Remix of CustomFPV and Aerial Outlaws' Camera Mount for tiny whoops Features Available Angles: 10°-60° @ 1° interval apart Mounting Pattern: 25.5x25.5mm AIO/Whoop mount Weight: 0.5±0.1g No 42° angle. Why? Because we have 42.5° Note: A…
This model is compatible with the lego system.
Enclosure for the GC0308 camera module for inexpensive face tracking for VR. You can find the camera module online for roughly $15-20. The enclosure snaps together without hardware. This is designed to work with HTC Vive Face Tracker…
This model is compatible with the lego system.
Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…
Though you can use most canopies for the Hachidorii XS and V2 - with some slight modification to the holes to press fit onto M2 nylon screws , I've decided that it would be great to have a set of canopies for a few cameras. These aren't…
A 15° to 50° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,20mm Infill: 100% Filament brand: R3D Filament color: Dark Blue, Dark Skin and Black Filament material: PLA Original: https://www.thingiverse.com/thing:6831686 By: Joh76
Inspired by briBrain Tiny Whoop Mount, but this version is styled to fit the betafpv c03 camera and sheds around 0.15 grams, now 0.6 grams Update 12/29/2024: Added the “Tweech Edition" ,this is the original design with just weight savings…
A 15° to 50° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place and a protective horn on top. Lightweight…
It was one of the first attempts. I highly recommend to use this instead: https://www.printables.com/model/1132751-c03-camera-holder-for-old-mobula6-canopy Tall version is for the option with more angle.
This is my take on a ultralightweight mount for the BetaFPV C03 camera (which is my camera of choice for lightweight whoops since the TW Pinch is rather difficult to get in EU at reasonable cost due to shipping). Weight: ~0.37g Camera…
2024/01/12 - Update. The resin printed part became brittle and unfortunately broke after almost a year of use. Perhaps a ‘thicker’ version or different resin would hold up longer. 2023/01/28 Replacement brackets to hold heater instrument…
Updated version of CV cage after it broke by my kids. Stiffer model / more material / higher tolerances / works fine I recommend add some grease anyhow… Have fun
Guide haut pour porte de placard avec profil en acier Optimum ref : GC065 Ce modèle contient 4 guides haut et permet d'équiper deux portes de placard coulissante. Ces guides remplacent les guides GC033
The little droid from Star Wars Visions episode 6 The inside of C03 can take the same electronics as my Screaming Ghost model so you can make the droid make noises when someone passes by. Please check that model for parts and wiring…
https://www.thingiverse.com/thing:7002598 and https://www.thingiverse.com/thing:6649280 put together using Prusa Slicer Category: R/C Vehicles
Uses Phoenix-Prints' design: https://makerworld.com/en/models/938312#profileId-903531 Needs a lot of supports, organic are not too annoying to remove. Version on pictures is 30 degrees. UPD: I've been using it almost daily for months now…
You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…
I printed this using Sainsmart Filament. 0.2mm Layerheight, 100% Infill. It came out at 0.35g. It can probably be lighter using PP. I recommend using Glue (E6000 or similar) to fix the cam inside the Canopy. If you're using the BetaFPV…
Information I made a 20° and a 25° degree camera mount for the BetaFPV C03 cam. I couldn't find any good mounts for the C03 that looked like the original. Kayou Frames has a 30 degree version on their Printables page but that's pretty…
I've been working on a personal lightweight 1s analog toothpick and I found myself enjoying its flight performance. I thought that I should give it a new canopy - something new and different from the recent canopies I've put out. I…
This model is compatible with the lego system.
Kayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO. Printer…
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
I printed this adapter in TPU. It shouldn't need supports as long as it's printed on its back surface (see pictures). As with the original adapter, the size of C03 lens will require that you trim your Mobula canopies in order for it to…
BETAFPV C03 canopy holder, fit for air65 camera and air 65 FC, 10° printed PETG, weight 2.5g print without support tree
A 30° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…
Kayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO. Printer…
This is an adapter for the BetaFpv c03 camera, for using it with bigger quads that can fit 19mm (micro) cameras. It is intended to be used with M2 heated inserts (Length 2mm, M2(OD 3.2mm) The cables should go facing down and the lock goes…
A case for the "Ultra Tiny USB Camera with GC0307 Sensor" to better protect the PCB and Components Camera Links: https://www.adafruit.com/product/5733 https://coolcomponents.co.uk/products/ultra-tiny-usb-camera-with-gc0307-sensor…
![BetaFPV C03 camera mount/canopy [Improved Complete Set]](https://media.printables.com/media/prints/5388c6c5-f443-476e-a91c-2cb185f211f6/images/11110340_e9dbe0a0-128d-4b63-b2fb-100d6291ac5f_1c42e2f3-7b8f-4de9-a9d5-c1a2f3042f00/screenshot-2025-11-08-212802.png)
![CustomFPV Camera Mount [c03 and 199c]](https://media.printables.com/media/prints/930d6a8d-46e6-4e81-b591-c6780ca1996c/images/10251982_e6ee577b-267c-48b4-a294-91b5262a02c1_d997eea3-1545-4a42-806c-5165a3826da0/20250716_174610.jpg)
![Lightweight Reversed Whoop Canopy [C03]](https://media.printables.com/media/prints/68fee2ff-db72-429a-9666-404605a41b90/images/11110978_7c22043d-4394-4326-b34c-822da0eca994_e0e2e0b5-39ec-49b3-ae44-747a1a2d57a3/img_7887.jpg)
