BetaFPV C03 UltraLight Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An ultralight Whoop Canopy for the BetaFPV C03 FPV Camera.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 309
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I printed this using Sainsmart Filament. 0.2mm Layerheight, 100% Infill.
It came out at 0.35g. It can probably be lighter using PP.
I recommend using Glue (E6000 or similar) to fix the cam inside the Canopy.
If you're using the BetaFPV Air G4 4in1 or any “shorter” AIO, no foam under the Canopy is required.
If you're using any “full size” AIO like the BetaFPV Air G4 5in1 AIO or similar, I would recommend using a small piece of foam under the Canopy.
Currently only available in 42.5° since I use a different Canopy for Freestyle.
Hit me up if you need more! :)