Inlay for "Deep Rock Galactic - The Boardgame" Standard Edition with printed models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlay for "Deep Rock Galactic - The Boardgame" Standard Edition with printed models
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Insert for the Standard Edition with printed models. The models are using my magnetic bases: https://www.printables.com/model/1271174-magnetic-bases-for-deep-rock-galactic-the-boardgam
The insert uses a 250 x 500 mm magnetic steel sheet, which has been to cut to 250 x 300 mm. The sheet should be glued to the box using doubled sided tape.
The “dwarfholder” uses 5 x 1 mm magnets, please make sure that the orientation matches. The order of the dwarfes is fixed. Sadly no space for Bosco on it.
The column uses two 3 x 3 mm round magnets and should be printed twice. All other parts are just printed once. No supports are needed.
I've printed with a 0.6 mm nozzle with a layer height of 0.4 mm, a 0.4 mm nozzle should work fine.