Inlay for "Deep Rock Galactic - The Boardgame" Standard Edition with printed models
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inlay for "Deep Rock Galactic - The Boardgame" Standard Edition with printed models
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Insert for the Standard Edition with printed models. The models are using my magnetic bases: https://www.printables.com/model/1271174-magnetic-bases-for-deep-rock-galactic-the-boardgam
The insert uses a 250 x 500 mm magnetic steel sheet, which has been to cut to 250 x 300 mm. The sheet should be glued to the box using doubled sided tape.
The “dwarfholder” uses 5 x 1 mm magnets, please make sure that the orientation matches. The order of the dwarfes is fixed. Sadly no space for Bosco on it.
The column uses two 3 x 3 mm round magnets and should be printed twice. All other parts are just printed once. No supports are needed.
I've printed with a 0.6 mm nozzle with a layer height of 0.4 mm, a 0.4 mm nozzle should work fine.