1 / 2
Voron M4 extruder motor plate for 202mm belt
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stretched the motor plate to use a 202mm belt instead of the stock 188mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I had all of the parts on hand to build an M4 extruder except for the 188mm belt called for in the original design. I had a 202mm, so I adjusted the motor mount plate to adjust for the longer belt and still have proper tensioning range.
