IKEA Platsa Gridfinity Base | Snap-Fit for drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular 11x16 Gridfinity base for 80cm IKEA Platsa drawer. Snaps together, no glue needed. Fits perfectly.
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 759
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D model is a modular Gridfinity baseplate designed specifically for the 80cm-wide IKEA Platsa drawers. (also known as Hjälpa/Fonnes/Kalbåden/Sannidal/Skatval)
It provides an 11x16 grid layout and fits perfectly without the need for glue or screws. The baseplate is divided into sections that can be printed separately and then snapped together, making it compatible with smaller 3D printers.
The design maximizes the usable width of the drawer—taking into account the raised edges of the Hjälpa drawer sides, which would otherwise cause height mismatches that make wider grids impractical.
Instructions
- Print the grid parts and fillerblocks in your preferred filament
- Print the snap connectors in PETG (NOT in PLA/PLA+, as this tends to snap when installing)
- Snap the parts together to form the grid
- Post your make and like the model :-)