1 / 4
HULA feet for voron rubber feet — zdjęcie 1
1 / 4

HULA feet for voron rubber feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a custom HULA feet design specifically for the original rubber feet of the Voron and without using any adapter.

Ocena
5 / 5
Polubienia
47
Pobrania
92
Wydruki
2
Wyświetlenia
1154
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom HULA feet design specifically for the original rubber feet of the Voron.

I aimed to make the design as low-profile as possible to minimize any increase in printer height.

The design includes two sets of TPU dampers: 

Damper 1 is for the bearing, while Damper 2 provides additional support for the rubber feet.

The bearing for this feet is 51103 (17x30x9). I choose this bearing is due to the rubber feet is about ~38mm radius.

I am using XTAB 51103 bearing from Taobao other brand should also work.

I printed the body and cover with FusRock ABS-GF for a snug fit with the main body, eliminating the need for screws. If you use a different material and find the fit too loose, you can slightly enlarge the cover dimensions.

Both tpu damper and the tpu base is printed with FusRock TPU 95A

I created this design 10 months ago and have been using it on my own Voron 2.4r2 printer, which sits on a cabinet. 

Through testing, I’ve found that it effectively reduces cabinet vibrations without impacting print quality.

To assemble it, simply place the 51103 bearing at the bottom of the body. 

Then, flip the top piece of the bearing upside down, ensuring the slot faces upward and the smooth side faces downward. This allows the ball to move freely.

Tagi