Triple Over Door Hook Hanger (Vase Mode Options) Large format printers only!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triple Over Door Hook Hanger (Vase Mode Options) Large format printers only!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 318
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Basic over door hook but with three hooks for extra storage. For large format printers unless you scale the height without scaling the depth and can make it fit on your build plate. There are two ways to print this and neither need supports but will probably need a brim for extra adhesion. I have a 300mm printer that I keep a 1.0 mm nozzle on so I designed this to make use of that size nozzle and vase mode, see below:
Method 1: Regular (compatible with any size nozzle)
- print using standard settings, infill optional, no vase mode
Method 2: Vase Mode (compatible with nozzles 0.6 - 1.0 mm)
- print using vase mode and manually set line width to 1.0mm. As long as the lines are printed 1 mm wide it is 100% vase mode compatible! Definitely check your slicers preview carefully to make sure everything is making sense.
Happy printing/organizing!