Triple Over Door Hook Hanger (Vase Mode Options) Large format printers only!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Triple Over Door Hook Hanger (Vase Mode Options) Large format printers only!
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 100
- Makes
- 1
- Views
- 318
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Basic over door hook but with three hooks for extra storage. For large format printers unless you scale the height without scaling the depth and can make it fit on your build plate. There are two ways to print this and neither need supports but will probably need a brim for extra adhesion. I have a 300mm printer that I keep a 1.0 mm nozzle on so I designed this to make use of that size nozzle and vase mode, see below:
Method 1: Regular (compatible with any size nozzle)
- print using standard settings, infill optional, no vase mode
Method 2: Vase Mode (compatible with nozzles 0.6 - 1.0 mm)
- print using vase mode and manually set line width to 1.0mm. As long as the lines are printed 1 mm wide it is 100% vase mode compatible! Definitely check your slicers preview carefully to make sure everything is making sense.
Happy printing/organizing!