1 / 2
Reversible Bass Thumb Rest for P-Bass Style Pickups (NO MOD) — zdjęcie 1
1 / 2

Reversible Bass Thumb Rest for P-Bass Style Pickups (NO MOD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reversible Bass Thumb Rest for P-Bass Style Pickups (NO MOD)

Ocena
0 / 5
Polubienia
11
Pobrania
70
Wydruki
0
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Share Alike

Hola! This model is here for you to add a thumb rest to basses with P-style pickups without zero permanent modification! All you have to measure how tall the pickup mounting ear is sticking up past the body of the bass and then print whichever model is equal to or less than that number. For example if your ear tops out at 3.7mm then I would use the 3.5mm file so it clamps down on it a little bit extra without pressing harder on the body. Then remove the screw from the outside of that pickup and put the mod on and screw back in. All done! Happy printing/slapping!

Currently supports 10 different options of mounting nub height: from 0.5mm to 5.0mm in increments of 0.5.

NOTE: Supports are required for this to print correctly but will be very minimal, use regular and not organic supports.

Tagi