Worker Prophecy Top Prime V5 and V6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same model as the previous one (https://www.printables.com/model/1268013-prophecy-top-prime-needs-slicing) but spiced up
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Spiced up my previous model to look more like a Recon MkII.
V5 is the same length as the original model, and V6 is longer, meant to cover up the slot the slide moves on when closed.
the hardware i used is a brass spacer and some screws.
- Screws: M3 x 12mm button head socket cap screws, thread length: 12mm, thread pitch: 0.5mm, thread diameter: 3mm. https://www.amazon.com/dp/B0CGTR8VYZ
- Spacer: M3x20 Female Thread Hexagonal Hex Brass Pillar Standoff Spacer. https://www.amazon.com/dp/B07WQTF9X9
- Two wood nails, 2.5mm diameter (cut to fit)
Used two spacers and 4 screws.
I added some connectors in the Bambu slicer, but one seems to error. Prints fine, but cannot export wit the connetors, so I am also including the bambu labs A1 .3mf file. It has the model already sliced with some added modifiers for a 100% fill strip for the sled attachment (for strength)added some connectors for the split. I also hand painted some supports to help the diagonal wall print a little better. The model in the pic had supports for the edges but i noticed some gunk in the middle.
I also exported the sliced model without the connectors; i believe the screws and standoffs will be enough (shrug maybe?) but wanted to make it easy to start. It also comes with a .3mf file with the modifiers adding a 100% infil on the sled connection.