Worker Prophecy Top Prime V5 and V6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Same model as the previous one (https://www.printables.com/model/1268013-prophecy-top-prime-needs-slicing) but spiced up
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Spiced up my previous model to look more like a Recon MkII.
V5 is the same length as the original model, and V6 is longer, meant to cover up the slot the slide moves on when closed.
the hardware i used is a brass spacer and some screws.
- Screws: M3 x 12mm button head socket cap screws, thread length: 12mm, thread pitch: 0.5mm, thread diameter: 3mm. https://www.amazon.com/dp/B0CGTR8VYZ
- Spacer: M3x20 Female Thread Hexagonal Hex Brass Pillar Standoff Spacer. https://www.amazon.com/dp/B07WQTF9X9
- Two wood nails, 2.5mm diameter (cut to fit)
Used two spacers and 4 screws.
I added some connectors in the Bambu slicer, but one seems to error. Prints fine, but cannot export wit the connetors, so I am also including the bambu labs A1 .3mf file. It has the model already sliced with some added modifiers for a 100% fill strip for the sled attachment (for strength)added some connectors for the split. I also hand painted some supports to help the diagonal wall print a little better. The model in the pic had supports for the edges but i noticed some gunk in the middle.
I also exported the sliced model without the connectors; i believe the screws and standoffs will be enough (shrug maybe?) but wanted to make it easy to start. It also comes with a .3mf file with the modifiers adding a 100% infil on the sled connection.