Can Tap Handle – For 12oz or 16oz Soda or Beer Cans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn 12oz/16oz cans into tap handles with this sleeve. Threaded & heat-insert versions. Use with Nosh cutters!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn your favorite beer or soda cans into custom tap handles for your home bar or kegerator setup! This model lets you showcase 12oz or 16oz cans by removing the bottom using the Nosh – The Can Cutters, and sliding the can over the inner sleeve.
For a sealed look, carefully cut the can while full over a sink, drain the contents, and preserve the unbroken top seal. Wash the inside of the can. Run a small bead of CA glue around the sleeve before seating the can fully to lock it in place.
Optional Inserts for Insert Installation:
Whether you’re a homebrewer wanting a custom tap or a craft beer fan wanting to preserve your favorite labeled cans, these tap handles make your setup stand out.
Recommended Print Settings:
- Material: PLA or PETG
- Layer Height: 0.2 mm for fine detail
- Infill: 20% or higher for durability
- Supports: Minimal organic supports for the base
Make every pour memorable—turn your beer cans into art and let your bar reflect your style! 🍺✨