1 / 4
Telescopic Controller Vertical/Portrait Adapter for Phones
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of vertical adapter for BSP-D6/D7 by OGK, but with removable hook to adapt to other controller brands
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the portrait adapter by OGK that allows you to clamp your phone vertically with the BSP-D6/D7, but I've modified it to work with BSP-D8/D9 instead. I've also made the hook part to be a detachable component, allowing users to make their own custom hooks for other brands of controllers.
Specifications:
- Supported device width - minimum 75mm for BSP D8/D9
- Supported device thickness - maximum 12mm
- Can be compatible with other brands/models of controllers - just measure the thickness of the extension bridge and make a hook that fits it
- Only compatible with Bluetooth controllers - for Type-C controllers, a gap is needed on one of the clamps to access the port, but I don't own one to be able to check fitment
Print notes:
- Tested with PLA
- Supports needed? - Yes, for clampLeft.stl and clampRight.stl, in the cutout area where the hooks will be inserted, I used 2.2mm pillars with 75° threshold