AR-10 Forward Assist Enlarger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to enlarge the forward assist button on my Haenel CR308, basically an AR-10, a bit.The button is used to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I wanted to enlarge the forward assist button on my Haenel CR308, basically an AR-10, a bit. The button is used to silently close the action while hunting - by just pressing it with my thumb. The larger area works well in this regard.
It's a nice fit - and it also fitted my STI AR15 forward assist button, just a tad less snug. You can play around with scaling or just edit the Fusion 360 file as needed.
This is also a nice way to add a splash of color to your rifle.
The Fusion 360 file is included.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.15
Filament: Filament PM PETG Black
Notes:
I used 2 perimeters and only enough top and bottom layers to keep the large part filled.
The parts gripping onto the FA button are hollow, they bend a bit easier this way.
Category: Sport & Outdoors