LTT Precision Screwdriver, Electric Screwdriver CS0802 Combined Box with Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged Box with Inserts for LTT Precision Screwdriver, Electric Screwdriver and Tools
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Box and Inserts are designed to hold a LTT Precision Screwdriver, an Electric Screwdriver (CS0802A), Bits and various Tools as shown in the Pictures.
The Box is based of the Rugged Box with a size of 100x200mm. For the latches and hinges you need 6x M3x20mm screws.
The bottom insert is a tight fit and can just be pushed down.
Depending on your Tolerances you might have to sand down the sides of the top insert a bit to get a proper fit so it does not get stuck, yet has little to no room to wiggle around.
The Electric Screwdriver is available here on Aliexpress. Others may also fit, mine has a diameter of 16mm and a length of 180mm. Anything longer/bigger will not fit.
The top Insert has space for over 80 4mm bits (standard for small screwdrivers). The six bits at the top can be up to 45mm long.
The Bottom Insert has space for various Tools, such as a few opening tools, tweezers, flexible screwdriver extension, small drill chuck and drills (were included with the CS0802A).