1 / 6
Makita DC18RC Single Port Rapid Charger wall mount — zdjęcie 1
1 / 6

Makita DC18RC Single Port Rapid Charger wall mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Makita DC18RC Single Port Rapid Charger wall mount using 8G screws.

Ocena
0 / 5
Polubienia
8
Pobrania
55
Wydruki
0
Wyświetlenia
321
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

One stop shop for a wall mount for the DC18RC charger. 

Standoff is 12mm long(8.2mm diameter instead of 8.1mm from original) with a 3mm base to tie them all together. 
Has a 4.5mm through hole for 8G screws and a 1.5mm chamfer hole. The screw head will sit on top of the standoff. Don't over tighten, it's not needed. 

From the original template, you'll notice that the 4 holes aren't all square to each other. Just make sure you have it round the correct way when installing it. 

 

I printed mine is ABS but i'm sure others would suffice as well. 

I did 4 walls, 3 top and bottom and 16% infill. 

 

All files are uploaded and if you are after another file type, just ask. 

Tagi