bullitt rocket foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for bullitt cargo bike with fins like a rocket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement foot for the stand of the bullitt cargo bikes. It has 5 rocket wings all round so you can ride faster ;)
Of course the feet wear out with use. That is why I have provided 12 mm material before the aluminium tube comes through. Printed in PLA and with 100% infill, it should last a while.
In my case, the foot fitted quite tightly. This can vary depending on the printer. The inner diameter of the model is 25.7 mm. It may be worth printing a cross-section to test and then scaling the model. It may also be possible to work with heat during assembly.
Have fun!