1 / 2
Compact Rev 2 EX BCAR for Dart Zone Outlaw Foam Blaster — zdjęcie 1
1 / 2

Compact Rev 2 EX BCAR for Dart Zone Outlaw Foam Blaster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

More compact body with 19mm insert.

Ocena
0 / 5
Polubienia
20
Pobrania
51
Wydruki
0
Wyświetlenia
525
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of Epicxxxx's excellent Rev 2 EX BCAR, shortened to remove the threaded section and with a 19mm insert added. It's optimized for the Dart Zone Outlaw foam blaster. 

The 8 degree version with #3 crush seems to stabilize Ruby and Worker Gen3 darts surprisingly well out of a stock Outlaw. I also made a 12 degree version with slightly more crush, but in my testing didn't perform noticeably better. 

This is similar to Dart Zone's own BCAR so should also work on other blasters that will accept a 19mm insert. Use a thin strip of tape to adjust tightness.

You'll need 9x F683ZZ Flanged Ball Bearings and M3x10 Screws. I really like these:

https://www.amazon.com/dp/B0CGX9C167?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
https://www.amazon.com/dp/B08H2HSPQD?ref=ppx_yo2ov_dt_b_fed_asin_title