Compact Rev 2 EX BCAR for Dart Zone Outlaw Foam Blaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More compact body with 19mm insert.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 51
- Makes
- 0
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Epicxxxx's excellent Rev 2 EX BCAR, shortened to remove the threaded section and with a 19mm insert added. It's optimized for the Dart Zone Outlaw foam blaster.
The 8 degree version with #3 crush seems to stabilize Ruby and Worker Gen3 darts surprisingly well out of a stock Outlaw. I also made a 12 degree version with slightly more crush, but in my testing didn't perform noticeably better.
This is similar to Dart Zone's own BCAR so should also work on other blasters that will accept a 19mm insert. Use a thin strip of tape to adjust tightness.
You'll need 9x F683ZZ Flanged Ball Bearings and M3x10 Screws. I really like these:
https://www.amazon.com/dp/B0CGX9C167?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
https://www.amazon.com/dp/B08H2HSPQD?ref=ppx_yo2ov_dt_b_fed_asin_title