Dishwasher basket bottom for chopsticks & small items
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for Electrolux FDB520RHS2A stock utensil basket: to prevent small items from falling through basket
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Problem
many dishwashers' standard, stock utensil baskets provide too much open area, allowing small/thin/narrow items like chopsticks & straws to fall through the bottom of the basket
consequently, when pulling the entire tray back & forth, the partially protruding item can jam the entire tray, or in some cases, entirely fall through to the bottom
this one is specially fit for the stock utensil basket of the Electrolux dishwasher model FDB520RHS2A
Solution
I started trying to print an open face box with mesh walls
mesh walls intended to be printed without support
R1 was entirely the wrong dimensions & wouldn't fit because I forgot to account for the drafted walls
R2 I don't remember
sadly I think I lost the Solidworks files for these first 2 revisions
I then realized that the existing holes in the basket in the vertical walls were already fairly small & it would be nearly as effective to print a simple screened “mat” liner at the bottom – which became R3
print in ABS or a similarly high HDT material