1 / 6
Schnellwechsel-Modifikation für den K1 bzw. K1 Max — zdjęcie 1
1 / 6

Schnellwechsel-Modifikation für den K1 bzw. K1 Max

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Schnellwechselplatte für den Extruder K1 bzw. K1 Max

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
223
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ich habe eine praktische Schnellwechsel-Modifikation für den K1 bzw. K1 Max entwickelt, die ein altbekanntes Problem löst: Ein verstopfter Extruder.

Jeder, der regelmäßig mit dem K1 oder K1 Max arbeitet, kennt das Dilemma – der Extruder ist mal wieder dicht, und man muss umständlich mehrere Schrauben lösen, nur um das Hotend zu reinigen oder auszutauschen.

Mit meiner Lösung gehört dieses Problem der Vergangenheit an. Die Modifikation ermöglicht einen schnellen und werkzeuglosen Austausch des Extruders, was nicht nur Zeit spart, sondern auch den Frust beim Drucken deutlich reduziert.

Effizienz trifft auf Benutzerfreundlichkeit – eine kleine Änderung mit großer Wirkung!

 

I’ve designed a convenient quick-swap modification for the K1 and K1 Max that addresses a well-known issue: a clogged extruder.

Anyone who regularly uses the K1 or K1 Max knows the struggle – the extruder is clogged again, and you have to loosen several screws just to clean or replace the hotend.

With my solution, that hassle is a thing of the past. This mod allows for a fast, tool-free extruder swap, saving time and eliminating frustration during your prints.

Efficiency meets ease of use – a small upgrade with a big impact!

Tagi